Jacobs Online |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Electrical Components
For hot wire foam cutting,
plastic bending, etc.
|
Catalog# FHCM
Fuse Holder, chassis mountedfor fuse size 3AG 6mm X 30mm Solder tabs Mounting nut and two plastic washers included. Mount in 9/16" dia hole. USA shipping: $4.00 is automatically charged for
first class USPS shipping for each fuse holder, excess shipping for multiple items
ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded.
|
Catalog# FHIL Fuse Holder, in-linefor fuse size 3AG
6mm X 30mm 15A rating (takes any amp rated fuse up to 15 amps. Fits all fuses on this page.)Cut wire in middle, strip both ends and attach into your circuit using solder, crimp terminals, wire nuts, etc. Quicker and easier than using the chassis mount version. USA shipping:
$4.00 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded.
|
Slow Blow Fuses3AG Ceramic500V rating (any voltage up to 500V) 6mm X 30mm (approx. 1/4" X 1-1/4") |
|||
Catalog# FSB00250.25 Amp (250mA) Slow Blow FuseUse this size for 25VA transformers USA shipping:
$4.00 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded. Package of 5 fuses
|
|||
Catalog# FSB0050.5 Amp Slow Blow FuseUse this size for 50VA transformers USA shipping:
$4.00 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded. Package of 5 fuses
|
|||
Catalog# FSB0101 Amp Slow Blow FuseUse this size for 100VA transformers USA shipping:
$4.00 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded. Package of 5 fuses
|
|||
Catalog# FSB0151.5 Amp Slow Blow Fuse(no writing on this fuse) Use this size for 150VA transformers USA shipping:
$4.00 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded. Package of 5 fuses
|
|||
Catalog# FSB0202 Amp Slow Blow FuseUSA shipping:
$4.00 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded. Package of 5 fuses
|
|||
Catalog# FSB0303 Amp Slow Blow FuseUse this size for 300VA transformers USA shipping:
$4.00 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded. Save on package of 5 fuses
|
|
Catalog# TS100 SPST Toggle Switch, ON-OFF2 position (on, off) 15 amp, 250V rated Screw terminals Mounting threads .46", use .5" hole for mounting Comes with two nuts, one washer, and position indicator plate Body color may vary Can be used as an on/off switch before the transformer input (or before the dimmer switch if used) for any transformer on this website. All transformers also need to have an appropriately sized fuse.Click on the picture for a larger image size. USA shipping:
$4.50 is
automatically charged for first class USPS shipping for each fuse
holder, excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer and the
fuses and fuse holder shipping will be refunded.
|
|
Catalog# TS122 DPDT Toggle Switch, ON-OFF-ON3 position (center position is off) 15 amp, 250V rated Screw terminals Mounting threads .46", use .5" hole for mounting Comes with two nuts, one washer, and position indicator plate Body color may vary Can be used to switch from high to low voltage on the transformers with dual output voltages as long as the rated output current is not exceeded for each set of contacts in the switch. When wired as shown at the bottom of the power supply design page, each secondary coil is wired through one set of contacts so as long as the current rating of the high voltage rating is not more than 15 amps, the switch can be used to switch those voltages. So check the series amperage rating for the transformer you have or will get to make sure it is not over 15 amps and the parallel wiring is not over 30 amps (15 for each pole). USA shipping:
$4.50 is
automatically charged for first class USPS shipping for each fuse
holder, excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer and the
fuses and fuse holder shipping will be refunded.
|
|
Spring ETS17 Extension Spring, short Length (including end loops): 35mm (1.7") Coil Diameter: 10mm (0.39") Wire Diameter: 1.2mm (0.047") Spring Constant: 9 lb/in (approximate)
All metals expand when heated so a spring is needed on one end of a resistance wire to take up the expansion when hot.
This spring is usually good for 3 feet or less, or maybe longer.
Do not run current through the spring, it will get very hot and could ruin the temper. Instead use an alligator clip and clip to the loop on the end of the spring where the resistance wire attaches.
3 feet of Nichome 60 or 80, Rene 47, or Kanthal A-1 will all expand about 1/4" when heated to 1100F. USA shipping:
$4.50 is
automatically charged for first class USPS shipping for each fuse
holder, excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer and the
fuses and fuse holder shipping will be refunded.
|
|
Spring ETS35 Extension Spring, long Length (including end loops): 90mm (3.54") Coil Diameter: 10mm (0.39") Wire Diameter: 1.2mm (0.047") Spring Constant: 4.8 lb/in (approximate)
All metals expand when heated so a spring is needed on one end of a resistance wire to take up the expansion when hot.
This spring can be used for long lengths of heated wire or where less change in tension is needed between hot and cold when there is enough room for the extra spring length.
Do not run current through the spring, it will get very hot and could ruin the temper. Instead use an alligator clip and clip to the loop on the end of the spring where the resistance wire attaches.
3 feet of Nichome 60 or 80, Rene 47, or Kanthal A-1 will all expand about 1/4" when heated to 1100F. USA shipping:
$4.50 is
automatically charged for first class USPS shipping for each fuse
holder, excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer and the
fuses and fuse holder shipping will be refunded.
|
|
Catalog# PC5 Power Cord 3-prong plug When plugging this International power cord into a USA outlet, the wire color
coding becomes: Brown = neutral Green with yellow stripe = ground (this is because the USA hot side is on the opposite side from what it is in an international plug) USA shipping:
$4.50 is automatically charged for first class USPS shipping for each fuse holder,
excess shipping for multiple items ordered will be refunded.
For example, order fuses with fuse holder and transformer
and the fuses and fuse holder shipping will be refunded.
|
Products shown with "Add to Cart" buttons are in stock and prices current as of today, |
||
Copyright 2014 Jacobs Online LLC |
|